Setup Guide

Liechtenstein eSIM Installation: Complete Setup Steps (2026)

July 20269 min readBy Daniel Mercer, Lead eSIM Analyst

2 networks tested
5 providers compared
Updated June 2026

Daniel Mercer

Lead eSIM Analyst

43 countries tested280 plans reviewed14 airports tested8 years in telecom

Previously at Analysys Mason covering APAC mobile markets (2016-2021)

How we test

Published July 2026 · Updated June 2026

Compatibility

Phone compatibility for Liechtenstein data

iPhone

Supported models: iPhone XR, XS, 11 through 16 Pro Max, and SE (3rd generation). Requires iOS 16 or later. iPhones hold up to 8 eSIM profiles with 2 active simultaneously. Check carrier lock: Settings > General > About > Carrier Lock.

Android

Supported: Samsung Galaxy S21 and later (S22-S25, Z Flip/Fold series), Google Pixel 3+, Xiaomi 12T Pro and later. Requires Android 10 or later. eSIM profile limits vary: Samsung holds 5-8 profiles, Pixel supports 8+.

Is your phone unlocked?

[object Object]

Full device compatibility list · Check carrier unlock status

Providers

Choosing an eSIM provider for Liechtenstein

Nomad (Recommended)

Nomad is the recommended provider for Liechtenstein with a 4.1/5 rating. Best Budget pick. Plans available: 1GB, 3GB, 10GB. Installation via QR code delivered by email.

Overall

Install: 4.2/5 · QR Flow: 4/5

Docs: 3.9/5 · Reliability: 4.2/5

Nomad full review

Alternative providers

eSIM providers for Liechtenstein
Provider	Per GB	Rating	Best For
Nomad#1 Pick	from $3.00/GB	4.1/5	Best Budget
Airalo	from $4.50/GB	4.5/5	Best Overall
Saily	from $3.99/GB	4.4/5	Best Privacy
HelloRoam	from around $3.50 per gigabyte	4.4/5	Coverage + Value
Holafly	from $2.99/day	4.3/5	Best Unlimited

Which provider to choose

Budget travel: Nomad offers the lowest per-GB rate
Broadest coverage: Airalo covers 200+ countries on one account
Unlimited data: Holafly removes the data counter entirely
Privacy: Saily bundles NordVPN under the same account

Installation

Step-by-step: install your Liechtenstein eSIM

iOS installation (iPhone)

Open Settings > Cellular > Add eSIM
Select "Use QR Code"
Scan the QR code from your Nomad confirmation email
Label the plan (e.g., "Liechtenstein Travel")
Set as cellular data line (not your default for calls)
Do NOT enable data roaming yet
Confirm the plan appears under Settings > Cellular

iOS 18: the "Add eSIM" option appears under Settings > Cellular > Add Cellular Plan. iOS 17 and earlier: Settings > Cellular > Add eSIM.

Android installation (Google Pixel)

Open Settings > Network & Internet > Add eSIM
Select "Download a SIM instead" then scan
Scan the QR code from your Nomad confirmation email
Name the profile (e.g., "Liechtenstein Data")
Set as mobile data SIM
Do NOT enable data roaming yet
Verify the plan in SIM manager

Manual installation (if QR fails)

If the QR code does not scan, use manual entry:

Go to Settings > Cellular > Add eSIM
Select "Enter Details Manually"
Enter the SM-DP+ address from your provider email
Enter the activation code
Complete the setup as with the QR method

Use manual entry when: camera cannot read the QR code, the email was forwarded without the image, or you are installing on a second device.

Configuration

Network settings for FL1

Automatic APN configuration

Most eSIM profiles auto-configure APN settings for FL1's network. After installation, verify the APN is set correctly:

iPhone: Settings > Cellular > Cellular Data Options > Cellular Data Network
Android: Settings > Network & Internet > SIMs > (travel eSIM) > Access Point Names

A correctly configured APN shows the carrier name and data type. If the APN field is blank, your phone will attempt to auto-fill on first connection.

Manual APN entry

If auto-configuration fails (rare, typically older Android devices), enter APN settings manually. Check your provider's confirmation email for the exact values. Common fields:

APN configuration fields
Field	Value
APN Name	From provider email
APN	Provider-specific value
Authentication	None (most providers)
APN Protocol	IPv4/IPv6

Provider-specific APN values override FL1's carrier defaults. Always use the values from your provider, not generic carrier APNs.

Verification

After setup: testing your Liechtenstein eSIM

Signal and network verification

Check your status bar: the carrier name should show FL1or a roaming indicator. Signal bars confirm connection strength. Go to Settings > Cellular to verify data usage is counting on the travel eSIM line.

"FL1" or roaming icon: Connected and working
"Searching...": Still connecting, wait 2-3 minutes
"No Service": Data roaming is off or wrong SIM line selected

Speed test

Run fast.com or Speedtest.net to verify your connection speed. Expected speeds: 5G (LTE typically 20-80 Mbps, 5G 100-500 Mbps where available). Speeds vary by location: airports and city centers are fastest, rural areas slower.

Verifying data roaming is active

Go to Settings > Cellular > (travel eSIM) > Data Roaming: ON. Test by opening any website in your browser. If it loads, roaming is active. If not, toggle data roaming off and back on, then restart your phone.

Dual-SIM verification

Confirm your home SIM still receives calls and texts. Confirm the travel eSIM handles all data traffic. Test: send yourself a text message to your home number. Then load a webpage. Both should work simultaneously. If data routes through the home SIM instead, switch your cellular data line to the travel eSIM.

Airport Guide

Arriving at Liechtenstein's main airport with your eSIM

Before boarding

Add your Liechtenstein eSIM profile 24 hours before your flight. Scan the QR code from your confirmation email while connected to stable WiFi at home. After the profile downloads, disable it immediately under Settings so the validity period does not begin. Attempting installation at Liechtenstein's main airport over public WiFi adds unnecessary risk — the download requires a clean HTTPS connection that captive portals interrupt.

During the flight

During the flight, double-check that your Liechtenstein eSIM is configured as the cellular data line. Do not enable it yet. Confirm that data roaming on your home SIM is turned off to prevent accidental charges the moment airplane mode switches off after landing.

After landing

As the plane parks, switch off airplane mode. Enable the Liechtenstein eSIM under Settings and turn on data roaming for that specific line. FL1 connects in 60-90 seconds. Your first notification pops up before the aisle clears. SIM counter availability at Liechtenstein's main airport varies by terminal and time of day. Your eSIM eliminates that variable entirely.

Leaving the airport

Use your Liechtenstein data to check exchange rates before withdrawing cash from an ATM in the arrivals hall. Compare taxi and transit prices on your phone. Having data from the moment you land turns every decision into an informed one. Liechtenstein's emergency number is 112/117/118/144 — it works without data, but having your eSIM active means you can also share GPS coordinates with emergency services.

Device Setup

Device-specific instructions for Liechtenstein

iPhone (iOS 17+)

Open Settings > Cellular > Add eSIM > Use QR Code.
Point the camera at the QR code from your provider's email. The profile downloads in 5-15 seconds on stable WiFi.
Tap "Add Cellular Plan" when prompted. Label the plan "Liechtenstein Data" to distinguish it from your home line.
Go to Settings > Cellular > Cellular Data and select the Liechtenstein eSIM as your active data line.
Turn on Data Roaming for the Liechtenstein line only: Settings > Cellular > [Liechtenstein Data] > Data Roaming > On.
After landing at Liechtenstein's main airport, toggle the eSIM on. FL1 registers your profile in 60-90 seconds. APN settings auto-configure for most Liechtenstein eSIM plans on FL1's network.
Verify: open Safari and load any webpage. If the page renders, your Liechtenstein data is active at 5G speeds.

Carrier confirmation: Your status bar should display "FL1" or "7acht" with 5G/LTE signal within 60-90 seconds. On iPhone, check Settings > Cellular — the Liechtenstein line shows "FL1" under Network. If you see "5G" in the status bar, your phone has connected to FL1's 5G band.

Note: If the carrier field shows "No Service" after 2 minutes, go to Settings > Cellular > Network Selection, turn off Automatic, wait 10 seconds, then turn it back on. If FL1 does not appear in the list, restart your iPhone (hold Side + Volume Down for 3 seconds, slide to power off, wait 30 seconds, power on).

Samsung Galaxy (One UI 6+)

Open Settings > Connections > SIM Manager > Add eSIM.
Select "Scan QR Code" and frame the QR code from your provider's email. The download completes in 5-15 seconds.
Tap "Add" when the carrier profile loads. Label it "Liechtenstein Data" under SIM Manager for clarity.
Set the Liechtenstein eSIM as your mobile data SIM: Settings > Connections > SIM Manager > Mobile Data > select Liechtenstein eSIM.
Enable Data Roaming: Settings > Connections > Mobile Networks > Data Roaming > On (for the travel SIM only).
After landing at Liechtenstein's main airport, enable the eSIM. FL1's 5G/LTE network registers within 60-90 seconds. APN settings load automatically for most Liechtenstein eSIM plans on FL1's network.
Verify: open Chrome and load any page. Data flowing confirms your Liechtenstein eSIM is active.

Carrier confirmation: Your status bar should display "FL1" or "7acht" with 5G/LTE signal within 60-90 seconds. On Samsung, check Settings > Connections > SIM Manager — the travel SIM shows "FL1" as the connected network. A "5G" icon in the status bar confirms FL1's 5G connection.

Note: If "No Service" persists after 2 minutes, go to Settings > Connections > Mobile Networks > Network Operators, switch from Automatic to Manual, wait for the scan to complete, then select FL1. If the carrier does not appear, restart the device: hold Power + Volume Down until the restart menu appears.

Google Pixel (Android 14+)

Open Settings > Network & Internet > SIMs > Add SIM > Download SIM.
Scan the QR code from your eSIM provider's email. The profile downloads in under 15 seconds.
Confirm the download and label the SIM "Liechtenstein Data" for identification.
Set as mobile data SIM: Settings > Network & Internet > SIMs > Liechtenstein Data > Use for mobile data.
Enable roaming: Settings > Network & Internet > SIMs > Liechtenstein Data > Roaming > On.
After landing at Liechtenstein's main airport, enable the profile. FL1 connects within 60-90 seconds. APN settings self-configure on Pixel devices for most Liechtenstein plans.
Open Chrome and load any page to verify data connectivity on FL1's 5G/LTE network.

Carrier confirmation: Your status bar should display "FL1" or "7acht" with 5G/LTE signal within 60-90 seconds. On Pixel, check Settings > Network & Internet > SIMs — the travel SIM displays "FL1" as the active network.

Note: If the signal does not register within 2 minutes, go to Settings > Network & Internet > SIMs > Liechtenstein Data > Advanced > Choose network, switch to Manual, let the scan run, and select FL1. If it fails, reset network settings under Settings > System > Reset options > Reset Mobile, WiFi & Bluetooth.

Carrier Config

Carrier troubleshooting for Liechtenstein

FL1

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "FL1" from the list. The phone locks onto FL1's 5G/LTE band and data resumes within 30 seconds.

Expected speed: Fastest 5G/LTE speeds in Liechtenstein's urban areas

Common issue: Some eSIM plans routed through FL1 require data roaming to be enabled on the travel SIM line specifically. Leaving it off is the most common reason travelers report zero signal after landing in Liechtenstein. Check under Settings > Cellular > [Travel eSIM] > Data Roaming.

Resolution: Toggle airplane mode on for 15 seconds, then off. This forces a fresh network scan without a full restart. FL1 should appear in your carrier field within 60 seconds. If it does not, use manual network selection to find and choose FL1 directly.

7acht

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "7acht" from the list. The phone locks onto 7acht's 5G/LTE band and data resumes within 30 seconds.

Expected speed: Reliable 5G/LTE coverage across Liechtenstein's main cities

Common issue: 7acht may show a signal bar but no data if the APN was not auto-configured. This happens on roughly 10-15% of Liechtenstein eSIM activations. Contact your eSIM provider for the correct APN string.

Resolution: Reset network settings: Settings > General > Transfer or Reset > Reset Network Settings (iPhone) or Settings > General Management > Reset > Reset Network Settings (Samsung). This clears saved WiFi passwords but resolves most 7acht registration failures. Re-enable the Liechtenstein eSIM after the reset completes.

Salt LI

APN: "internet" — enter under Settings > Cellular > Cellular Data Network (iPhone) or Settings > Connections > Mobile Networks > Access Point Names (Samsung). Leave username, password, and proxy fields blank. Save and restart data.

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "Salt LI" from the list. The phone locks onto Salt LI's 5G/LTE band and data resumes within 30 seconds.

Expected speed: Reliable 5G/LTE coverage across Liechtenstein's main cities

Common issue: If Salt LI connects but web pages time out, the phone may have defaulted to your home SIM for data. Go to Settings > Cellular > Cellular Data and confirm the Liechtenstein eSIM is selected. The home SIM handles calls only.

Resolution: Contact your eSIM provider's support with the SM-DP+ activation address from your confirmation email. Some Salt LI profile issues require a new QR code. Airalo responds via in-app chat in under 5 minutes; Holafly offers WhatsApp support at +34 644 44 37 97.

Dual SIM

Running two SIMs in Liechtenstein: data line vs call line

Data line setup

Open Settings > Cellular and tap "Cellular Data." Select the Liechtenstein eSIM. All data now routes through FL1's local network at local rates. Do not enable "Allow Cellular Data Switching" — that setting lets the phone fall back to your home SIM for data, which triggers international roaming fees without warning.

Calls and SMS

The home SIM stays on for calls and verification texts. When someone dials your regular number, it rings normally. Standard SMS charges from your home carrier may apply for receiving texts abroad — check your plan. All internet-based communication routes through FL1's data network on the Liechtenstein eSIM.

Emergency dialing

Emergency services in Liechtenstein are reached at 112/117/118/144. Both your home SIM and the travel eSIM can place this call. Data from the eSIM adds GPS location sharing, real-time translation for language barriers, and the ability to look up your embassy's local address and phone number.

Battery impact

Running two SIMs draws 10-15% more battery per day than a single SIM. Both radios maintain separate network connections. If your battery runs low during the day, disable the home SIM temporarily under Settings > Cellular — the Liechtenstein eSIM is the priority line for data. Re-enable the home SIM when you reach WiFi at your hotel. Liechtenstein uses Type C/J outlets — carry the right adapter.

Hotspot

Share your Liechtenstein eSIM data with other devices

Personal hotspot works with most Liechtenstein eSIM plans from major providers. Enable it under your phone's settings. The hotspot shares your FL1 5G/LTE connection with nearby devices via WiFi, Bluetooth, or USB. WiFi tethering has the widest range (roughly 10 meters) but uses more battery. USB tethering charges your phone while sharing data — ideal for laptop sessions. Expect 5G/LTE speeds through hotspot, slightly below direct device connection on the connected device.

Provider restrictions

Hotspot availability is a plan feature, not a country restriction. Most fixed-data Liechtenstein plans support tethering. Unlimited plans are the exception — carriers throttle or block hotspot on unlimited tiers to manage network load on FL1's infrastructure. If you need hotspot, buy a fixed-data plan with an explicit hotspot label.

Data impact

Tethering multiplies data use. A single Zoom call uses 300-500 MB/hour. Slack with screen sharing adds 200-400 MB/hour. Background cloud sync on a connected laptop can consume 500 MB-1 GB without any visible activity. Before hotspotting in Liechtenstein, disable auto-sync and set video calls to audio-only when possible — that drops consumption by 70%.

Connect to Liechtenstein's 5G network via eSIM

FL1 offers limited 5G availability in select areas in Liechtenstein. Enable 5G on your eSIM: iPhone — Settings > Cellular > Voice & Data > 5G Auto. Samsung — Settings > Connections > Mobile Networks > Network Mode > select 5G. Your phone needs 5G hardware (iPhone 12+, Galaxy S21+, Pixel 5+). "5G Auto" on iPhone conserves battery by falling back to LTE when 5G speed is not needed.

WiFi Backup

Setting up eSIM in Liechtenstein: WiFi backup plan

WiFi in Liechtenstein: moderate WiFi in urban areas; spotty in rural regions. eSIM installation requires a brief WiFi connection for the QR code scan (under 1 MB of data). Hotel WiFi works, but home WiFi before departure is the safest option. Captive portals at Liechtenstein's main airport and public hotspots sometimes block the carrier server the eSIM download needs.

Activating without WiFi

Manual activation fallback: every eSIM order includes an SM-DP+ server address and an activation code in the confirmation email. Instead of scanning the QR code, enter these values manually. iPhone: Settings > Cellular > Add eSIM > Enter Details Manually. Samsung: Settings > Connections > SIM Manager > Add eSIM > Enter Code. This works over any data connection, including your home carrier's mobile data. The transfer is under 1 MB.

Multi-Country

Managing eSIM profiles: Liechtenstein + other destinations

Planning a multi-country European trip (Schengen or cross-border rail) that includes Liechtenstein? Install a dedicated eSIM for each country before you leave. Single-country plans connect to the primary local carrier (FL1 in Liechtenstein) and deliver better speeds than regional eSIMs that route through roaming agreements. Your phone holds up to 8 eSIM profiles — switching between them at each border takes 30 seconds. Label each profile with the country name for quick identification.

Switching eSIM profiles between countries

Switching eSIMs at the border: go to Settings, find your SIM/eSIM list, turn off the previous country's profile, and enable Liechtenstein. Set the Liechtenstein eSIM as your data line and enable data roaming for that line specifically. FL1 picks up within 60-90 seconds. Keep all other profiles saved — they occupy no data until re-enabled.

Fixes

Setup troubleshooting for Liechtenstein

"eSIM Not Supported" error

Cause: Your phone is carrier-locked or the model does not support eSIM.

Fix: Contact your home carrier to unlock (24-72 hours). Verify your model supports eSIM at our compatibility list.

"Unable to Activate eSIM" error

Cause: eSIM profile slot is full, or the QR code was already redeemed.

Fix:Delete unused eSIM profiles in Settings > Cellular. iPhones hold 8 profiles (2 active). If the QR shows as used, contact your provider for a replacement code.

Connected but no data

Cause: Data roaming is off on the travel eSIM, or data is routing through the home SIM.

Fix:Settings > Cellular > select travel eSIM > Data Roaming ON. Also verify: Settings > Cellular > Cellular Data > select the travel eSIM as your data line. Restart your phone after making changes.

Provider-specific installation issues

Airalo: QR code in email and in-app. Re-download available in the app under "My eSIMs"
Nomad: QR delivered by email only. Check spam folder. No app required for installation
Holafly: QR code in app and email. Unlimited plans activate on first connection
Saily: QR in app. VPN configuration separate from eSIM setup

Full troubleshooting guide · Transfer eSIM to new phone

Quick Answers

Common setup questions for Liechtenstein

FAQ

Setup questions for Liechtenstein eSIM

How do I install an eSIM for Liechtenstein on iPhone?

Open Settings > Cellular > Add eSIM > Use QR Code. Scan the code from your provider email. Label the plan "Liechtenstein Travel" and set it as your cellular data line. The process takes about 5 minutes over WiFi.

How do I install an eSIM for Liechtenstein on Android?

Open Settings > Network & Internet > Add eSIM. Select "Download a SIM instead" then scan. Scan the QR code from your provider email. Name the profile "Liechtenstein Data" and set it as your mobile data SIM. Steps vary slightly between Google Pixel and other Android versions.

What APN settings do I need for Liechtenstein?

Most eSIMs auto-configure APN for FL1's network. If auto-config fails, check your provider's confirmation email for manual APN values. Go to Settings > Cellular > Cellular Data Options > Cellular Data Network to verify or enter settings manually.

Can I install the eSIM before my trip to Liechtenstein?

Yes. Install at home over WiFi any time before departure. Do not enable data roaming until you land in Liechtenstein. Plans count from the first network connection, not from installation. Installing early is recommended.

How many eSIM profiles can my phone hold?

iPhone holds up to 8 eSIM profiles with 2 active simultaneously. Android varies by manufacturer: Samsung supports 5-8, Google Pixel supports 8+. Delete unused profiles in Settings > Cellular to make room for new ones.

What if the QR code does not work for Liechtenstein?

Use manual activation: Settings > Cellular > Add eSIM > Enter Details Manually. Find the SM-DP+ address and activation code in your provider email. This method works when the camera cannot read the QR code or when using a forwarded email.

How do I know my eSIM is connected to FL1?

Check the status bar for "FL1" or a roaming indicator. Run a speed test at fast.com. Expected speeds: 5G speeds. If you see "No Service," enable data roaming on the travel eSIM line.

How to configure dual SIM for Liechtenstein?