Setup Guide

How to Install an eSIM for Uruguay: 2026 Setup Guide

July 20269 min readBy Daniel Mercer, Lead eSIM Analyst

1 network tested
5 providers compared
Updated June 2026

Daniel Mercer

Lead eSIM Analyst

43 countries tested280 plans reviewed14 airports tested8 years in telecom

Previously at Analysys Mason covering APAC mobile markets (2016-2021)

How we test

Published July 2026 · Updated June 2026

Compatibility

Phone requirements for Uruguay eSIM

iPhone

Supported models: iPhone XR, XS, 11 through 16 Pro Max, and SE (3rd generation). Requires iOS 16 or later. iPhones hold up to 8 eSIM profiles with 2 active simultaneously. Check carrier lock: Settings > General > About > Carrier Lock.

Android

Supported: Samsung Galaxy S21 and later (S22-S25, Z Flip/Fold series), Google Pixel 3+, Xiaomi 12T Pro and later. Requires Android 10 or later. eSIM profile limits vary: Samsung holds 5-8 profiles, Pixel supports 8+.

Is your phone unlocked?

[object Object]

Full device compatibility list · Check carrier unlock status

Providers

Provider breakdown for Uruguay

Nomad (Recommended)

Nomad is the recommended provider for Uruguay with a 4.1/5 rating. Best Budget pick. Plans available: 1GB, 3GB, 5GB, 10GB, 20GB plus unlimited daily options. Installation via QR code delivered by email.

Overall

Install: 4.2/5 · QR Flow: 4/5

Docs: 3.9/5 · Reliability: 4.2/5

Nomad full review

Alternative providers

eSIM providers for Uruguay
Provider	Per GB	Rating	Best For
Nomad#1 Pick	from $3.00/GB	4.1/5	Best Budget
Airalo	from $4.50/GB	4.5/5	Best Overall
Saily	from $3.99/GB	4.4/5	Best Privacy
HelloRoam	from around $3.50 per gigabyte	4.4/5	Coverage + Value
Holafly	from $2.99/day	4.3/5	Best Unlimited

Which provider to choose

Budget travel: Nomad offers the lowest per-GB rate
Broadest coverage: Airalo covers 200+ countries on one account
Unlimited data: Holafly removes the data counter entirely
Privacy: Saily bundles NordVPN under the same account

Installation

Uruguay eSIM installation guide

iOS installation (iPhone)

Open Settings > Cellular > Add eSIM
Select "Use QR Code"
Scan the QR code from your Nomad confirmation email
Label the plan (e.g., "Uruguay Travel")
Set as cellular data line (not your default for calls)
Do NOT enable data roaming yet
Confirm the plan appears under Settings > Cellular

iOS 18: the "Add eSIM" option appears under Settings > Cellular > Add Cellular Plan. iOS 17 and earlier: Settings > Cellular > Add eSIM.

Android installation (Stock Android)

Open Settings > Network & Internet > SIMs > Add eSIM
Select "Scan QR code"
Scan the QR code from your Nomad confirmation email
Name the profile (e.g., "Uruguay Data")
Set as mobile data SIM
Do NOT enable data roaming yet
Verify the plan in SIM manager

Manual installation (if QR fails)

If the QR code does not scan, use manual entry:

Go to Settings > Cellular > Add eSIM
Select "Enter Details Manually"
Enter the SM-DP+ address from your provider email
Enter the activation code
Complete the setup as with the QR method

Use manual entry when: camera cannot read the QR code, the email was forwarded without the image, or you are installing on a second device.

Configuration

How to configure APN for Uruguay

Automatic APN configuration

Most eSIM profiles auto-configure APN settings for Antel's network. After installation, verify the APN is set correctly:

iPhone: Settings > Cellular > Cellular Data Options > Cellular Data Network
Android: Settings > Network & Internet > SIMs > (travel eSIM) > Access Point Names

A correctly configured APN shows the carrier name and data type. If the APN field is blank, your phone will attempt to auto-fill on first connection.

Manual APN entry

If auto-configuration fails (rare, typically older Android devices), enter APN settings manually. Check your provider's confirmation email for the exact values. Common fields:

APN configuration fields
Field	Value
APN Name	From provider email
APN	Provider-specific value
Authentication	None (most providers)
APN Protocol	IPv4/IPv6

Provider-specific APN values override Antel's carrier defaults. Always use the values from your provider, not generic carrier APNs.

Verification

Uruguay eSIM connection verification

Signal and network verification

Check your status bar: the carrier name should show Antelor a roaming indicator. Signal bars confirm connection strength. Go to Settings > Cellular to verify data usage is counting on the travel eSIM line.

"Antel" or roaming icon: Connected and working
"Searching...": Still connecting, wait 2-3 minutes
"No Service": Data roaming is off or wrong SIM line selected

Speed test

Run fast.com or Speedtest.net to verify your connection speed. Expected speeds: 4G LTE (LTE typically 20-80 Mbps, 5G 100-500 Mbps where available). Speeds vary by location: airports and city centers are fastest, rural areas slower.

Verifying data roaming is active

Go to Settings > Cellular > (travel eSIM) > Data Roaming: ON. Test by opening any website in your browser. If it loads, roaming is active. If not, toggle data roaming off and back on, then restart your phone.

Dual-SIM verification

Confirm your home SIM still receives calls and texts. Confirm the travel eSIM handles all data traffic. Test: send yourself a text message to your home number. Then load a webpage. Both should work simultaneously. If data routes through the home SIM instead, switch your cellular data line to the travel eSIM.

Airport Guide

Arriving at Uruguay's main airport with your eSIM

Before boarding

Set up your Uruguay eSIM before you leave the house. The QR code scan takes 90 seconds over a stable connection. Use your home WiFi, not mobile data or airport networks. After the profile installs, set the eSIM to off so Antel does not register it during a layover. The data counter starts on first network connection, not at installation time.

During the flight

Use the flight to prepare your phone settings. Open Settings, navigate to Cellular, and verify the Uruguay eSIM is assigned as your data line. Turn off data roaming on your home carrier line. When you land, the only toggle left is enabling the travel eSIM.

After landing

After touchdown, open Settings, enable the Uruguay eSIM, and turn on data roaming for the travel line. Antel registers the profile in 60-90 seconds. Check your status bar for the carrier name and signal bars. SIM counter availability at Uruguay's main airport varies by terminal and time of day. Your eSIM eliminates that variable entirely.

Leaving the airport

Your eSIM gives you data before you clear customs. By the time you reach ground transport, your map is loaded, your ride is booked, and your hotel has your arrival message. Zero idle time at Uruguay's main airport. Uruguay's emergency number is 911 — it works without data, but having your eSIM active means you can also share GPS coordinates with emergency services.

Device Setup

Device-specific instructions for Uruguay

iPhone (iOS 17+)

Open Settings > Cellular > Add eSIM > Use QR Code.
Point the camera at the QR code from your provider's email. The profile downloads in 5-15 seconds on stable WiFi.
Tap "Add Cellular Plan" when prompted. Label the plan "Uruguay Data" to distinguish it from your home line.
Go to Settings > Cellular > Cellular Data and select the Uruguay eSIM as your active data line.
Turn on Data Roaming for the Uruguay line only: Settings > Cellular > [Uruguay Data] > Data Roaming > On.
After landing at Uruguay's main airport, toggle the eSIM on. Antel registers your profile in 60-90 seconds. APN settings auto-configure for most Uruguay eSIM plans on Antel's network.
Verify: open Safari and load any webpage. If the page renders, your Uruguay data is active at 4G LTE speeds.

Carrier confirmation: Your status bar should display "Antel" or "Movistar UY" with 4G signal within 60-90 seconds. On iPhone, check Settings > Cellular — the Uruguay line shows "Antel" under Network. The "4G" indicator confirms your connection type.

Note: If the carrier field shows "No Service" after 2 minutes, go to Settings > Cellular > Network Selection, turn off Automatic, wait 10 seconds, then turn it back on. If Antel does not appear in the list, restart your iPhone (hold Side + Volume Down for 3 seconds, slide to power off, wait 30 seconds, power on).

Samsung Galaxy (One UI 6+)

Open Settings > Connections > SIM Manager > Add eSIM.
Select "Scan QR Code" and frame the QR code from your provider's email. The download completes in 5-15 seconds.
Tap "Add" when the carrier profile loads. Label it "Uruguay Data" under SIM Manager for clarity.
Set the Uruguay eSIM as your mobile data SIM: Settings > Connections > SIM Manager > Mobile Data > select Uruguay eSIM.
Enable Data Roaming: Settings > Connections > Mobile Networks > Data Roaming > On (for the travel SIM only).
After landing at Uruguay's main airport, enable the eSIM. Antel's 4G network registers within 60-90 seconds. APN settings load automatically for most Uruguay eSIM plans on Antel's network.
Verify: open Chrome and load any page. Data flowing confirms your Uruguay eSIM is active.

Carrier confirmation: Your status bar should display "Antel" or "Movistar UY" with 4G signal within 60-90 seconds. On Samsung, check Settings > Connections > SIM Manager — the travel SIM shows "Antel" as the connected network. The connection type shows as "4G".

Note: If "No Service" persists after 2 minutes, go to Settings > Connections > Mobile Networks > Network Operators, switch from Automatic to Manual, wait for the scan to complete, then select Antel. If the carrier does not appear, restart the device: hold Power + Volume Down until the restart menu appears.

Google Pixel (Android 14+)

Open Settings > Network & Internet > SIMs > Add SIM > Download SIM.
Scan the QR code from your eSIM provider's email. The profile downloads in under 15 seconds.
Confirm the download and label the SIM "Uruguay Data" for identification.
Set as mobile data SIM: Settings > Network & Internet > SIMs > Uruguay Data > Use for mobile data.
Enable roaming: Settings > Network & Internet > SIMs > Uruguay Data > Roaming > On.
After landing at Uruguay's main airport, enable the profile. Antel connects within 60-90 seconds. APN settings self-configure on Pixel devices for most Uruguay plans.
Open Chrome and load any page to verify data connectivity on Antel's 4G network.

Carrier confirmation: Your status bar should display "Antel" or "Movistar UY" with 4G signal within 60-90 seconds. On Pixel, check Settings > Network & Internet > SIMs — the travel SIM displays "Antel" as the active network.

Note: If the signal does not register within 2 minutes, go to Settings > Network & Internet > SIMs > Uruguay Data > Advanced > Choose network, switch to Manual, let the scan run, and select Antel. If it fails, reset network settings under Settings > System > Reset options > Reset Mobile, WiFi & Bluetooth.

Carrier Config

Carrier troubleshooting for Uruguay

Antel

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "Antel" from the list. The phone locks onto Antel's 4G band and data resumes within 30 seconds.

Expected speed: Fastest 4G speeds in Uruguay's urban areas

Common issue: Antel may show a signal bar but no data if the APN was not auto-configured. This happens on roughly 10-15% of Uruguay eSIM activations. Contact your eSIM provider for the correct APN string.

Resolution: Reset network settings: Settings > General > Transfer or Reset > Reset Network Settings (iPhone) or Settings > General Management > Reset > Reset Network Settings (Samsung). This clears saved WiFi passwords but resolves most Antel registration failures. Re-enable the Uruguay eSIM after the reset completes.

Movistar UY

APN: "movistar.es" — enter under Settings > Cellular > Cellular Data Network (iPhone) or Settings > Connections > Mobile Networks > Access Point Names (Samsung). Leave username, password, and proxy fields blank. Save and restart data.

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "Movistar UY" from the list. The phone locks onto Movistar UY's 4G band and data resumes within 30 seconds.

Expected speed: Reliable 4G coverage across Uruguay's main cities

Common issue: If Movistar UY connects but web pages time out, the phone may have defaulted to your home SIM for data. Go to Settings > Cellular > Cellular Data and confirm the Uruguay eSIM is selected. The home SIM handles calls only.

Resolution: Contact your eSIM provider's support with the SM-DP+ activation address from your confirmation email. Some Movistar UY profile issues require a new QR code. Airalo responds via in-app chat in under 5 minutes; Holafly offers WhatsApp support at +34 644 44 37 97.

Claro UY

APN: "claro.com.br" — enter under Settings > Cellular > Cellular Data Network (iPhone) or Settings > Connections > Mobile Networks > Access Point Names (Samsung). Leave username, password, and proxy fields blank. Save and restart data.

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "Claro UY" from the list. The phone locks onto Claro UY's 4G band and data resumes within 30 seconds.

Expected speed: Reliable 4G coverage across Uruguay's main cities

Common issue: Claro UY's network occasionally delays eSIM profile registration during peak hours at major airports. If your phone shows "Searching..." for more than 2 minutes, turn off Automatic network selection, wait 10 seconds, then select Claro UY manually from the operator list.

Resolution: Restart your phone after adjusting network settings. Claro UY typically completes registration within 60-90 seconds of a fresh boot. If the issue persists, remove and re-add the eSIM profile using the manual activation code from your provider's confirmation email.

Dual SIM

Configure your home SIM and Uruguay eSIM together

Data line setup

Assign the Uruguay eSIM as your data-only line under Settings. Antel handles all internet traffic — maps, messaging apps, email, and browser. Your home SIM stays active in the background but carries zero data. This configuration prevents accidental roaming charges from your home carrier while keeping your primary number reachable.

Calls and SMS

Leave your home SIM active for voice and SMS only. Incoming calls reach you at your regular number. Outgoing calls default to the home SIM unless you select the travel line before dialing. Two-factor codes from your bank, email, and social accounts arrive via SMS on the home SIM — no interruption.

Emergency dialing

In an emergency, dial 911. The call routes through the strongest available network in Uruguay, even if your eSIM data has run out. With active data, you can also access location sharing, translate medical terms in real time, and pull up your travel insurance policy number.

Battery impact

Dual SIM uses 10-15% more power than single SIM. Both radios stay connected to their respective networks. For long days away from a charger, consider disabling the home SIM and keeping only the Uruguay eSIM on Antel's network. SMS verification codes can wait until you are plugged in at the hotel. Uruguay uses Type C/F/I/L power outlets.

Hotspot

Personal hotspot on Antel's network in Uruguay

Turn on personal hotspot to share your Uruguay eSIM data with a laptop or second device. On iPhone: Settings > Personal Hotspot > Allow Others to Join. On Samsung: Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot. Antel's 4G network delivers 4G speeds through hotspot, slightly below direct device connection to connected devices. Standard web browsing on a tethered laptop uses about 60-80 MB per hour. Email with attachments adds roughly 30-50 MB per hour.

Provider restrictions

Tethering restrictions depend on the provider and plan tier, not on Uruguay's network. Fixed-data plans (1GB-20GB) from Airalo and Saily include hotspot. Unlimited plans from Holafly may restrict it. Check "Hotspot/Tethering" in the plan feature list before checkout. A grayed-out toggle in Settings means the plan blocks it server-side.

Data impact

Connected devices use data aggressively. A MacBook with open browser tabs consumes 100-300 MB/hour in background refreshes alone. Before connecting to your Uruguay hotspot, close unnecessary tabs, pause Dropbox and iCloud sync, and disable macOS/Windows automatic updates. These steps can save 1-2 GB per day of hotspot use.

WiFi Backup

Uruguay WiFi availability for eSIM setup

Uruguay offers moderate WiFi in urban areas; spotty in rural regions. Install your eSIM before leaving home. The download is tiny (under 1 MB) but requires an uninterrupted HTTPS connection to the carrier's provisioning server. Public WiFi with captive portals — including Uruguay's main airport's network — can block this connection. Home WiFi eliminates the risk.

Activating without WiFi

No WiFi for QR scan? Use manual activation. Check your provider's email for the SM-DP+ address (a URL starting with "smdp+") and the matching activation code. On iPhone: Settings > Cellular > Add eSIM > Enter Details Manually. On Samsung: SIM Manager > Add eSIM > Enter Activation Code. You can use your home carrier's mobile data for this — it transfers less than 1 MB.

Multi-Country

Multi-stop itinerary: Uruguay eSIM alongside other profiles

For a South American multi-country route, install one eSIM per country before departure. Uruguay's eSIM connects to Antel's 4G network directly, avoiding the speed penalty that multi-country roaming eSIMs carry. At the Uruguay border, disable your previous eSIM and enable the Uruguay profile. The process: Settings > Cellular, toggle off the old line, toggle on the new one. Done in 30 seconds.

Switching eSIM profiles between countries

Border crossing procedure: disable the previous eSIM, enable Uruguay. iPhone: Settings > Cellular > tap each line to toggle. Samsung: Settings > Connections > SIM Manager > toggle lines. Confirm Uruguay is the active data line. Enable data roaming. Antel's 4G signal registers in 60-90 seconds. The entire switch takes 30 seconds.

Fixes

Common errors during Uruguay eSIM setup

"eSIM Not Supported" error

Cause: Your phone is carrier-locked or the model does not support eSIM.

Fix: Contact your home carrier to unlock (24-72 hours). Verify your model supports eSIM at our compatibility list.

"Unable to Activate eSIM" error

Cause: eSIM profile slot is full, or the QR code was already redeemed.

Fix:Delete unused eSIM profiles in Settings > Cellular. iPhones hold 8 profiles (2 active). If the QR shows as used, contact your provider for a replacement code.

Connected but no data

Cause: Data roaming is off on the travel eSIM, or data is routing through the home SIM.

Fix:Settings > Cellular > select travel eSIM > Data Roaming ON. Also verify: Settings > Cellular > Cellular Data > select the travel eSIM as your data line. Restart your phone after making changes.

Provider-specific installation issues

Airalo: QR code in email and in-app. Re-download available in the app under "My eSIMs"
Nomad: QR delivered by email only. Check spam folder. No app required for installation
Holafly: QR code in app and email. Unlimited plans activate on first connection
Saily: QR in app. VPN configuration separate from eSIM setup

Full troubleshooting guide · Transfer eSIM to new phone

Quick Answers

Common setup questions for Uruguay

FAQ

Common setup questions for Uruguay

How do I install an eSIM for Uruguay on iPhone?

Open Settings > Cellular > Add eSIM > Use QR Code. Scan the code from your provider email. Label the plan "Uruguay Travel" and set it as your cellular data line. The process takes about 5 minutes over WiFi.

How do I install an eSIM for Uruguay on Android?

Open Settings > Network & Internet > SIMs > Add eSIM. Select "Scan QR code". Scan the QR code from your provider email. Name the profile "Uruguay Data" and set it as your mobile data SIM. Steps vary slightly between Stock Android and other Android versions.

What APN settings do I need for Uruguay?

Most eSIMs auto-configure APN for Antel's network. If auto-config fails, check your provider's confirmation email for manual APN values. Go to Settings > Cellular > Cellular Data Options > Cellular Data Network to verify or enter settings manually.

Can I install the eSIM before my trip to Uruguay?

Yes. Install at home over WiFi any time before departure. Do not enable data roaming until you land in Uruguay. Plans count from the first network connection, not from installation. Installing early is recommended.

How many eSIM profiles can my phone hold?

iPhone holds up to 8 eSIM profiles with 2 active simultaneously. Android varies by manufacturer: Samsung supports 5-8, Google Pixel supports 8+. Delete unused profiles in Settings > Cellular to make room for new ones.

What if the QR code does not work for Uruguay?

Use manual activation: Settings > Cellular > Add eSIM > Enter Details Manually. Find the SM-DP+ address and activation code in your provider email. This method works when the camera cannot read the QR code or when using a forwarded email.

How do I know my eSIM is connected to Antel?

Check the status bar for "Antel" or a roaming indicator. Run a speed test at fast.com. Expected speeds: 4G LTE speeds. If you see "No Service," enable data roaming on the travel eSIM line.

How to scan eSIM QR code for Uruguay?