How to Install an eSIM for Grenada: 2026 Setup Guide
- 1 network tested
- 5 providers compared
- Updated June 2026
Daniel Mercer
Lead eSIM Analyst
Previously at Analysys Mason covering APAC mobile markets (2016-2021)
How we testPublished July 2026 · Updated June 2026
Compatibility
Check your device for Grenada eSIM
iPhone
Supported models: iPhone XR, XS, 11 through 16 Pro Max, and SE (3rd generation). Requires iOS 16 or later. iPhones hold up to 8 eSIM profiles with 2 active simultaneously. Check carrier lock: Settings > General > About > Carrier Lock.
Android
Supported: Samsung Galaxy S21 and later (S22-S25, Z Flip/Fold series), Google Pixel 3+, Xiaomi 12T Pro and later. Requires Android 10 or later. eSIM profile limits vary: Samsung holds 5-8 profiles, Pixel supports 8+.
Is your phone unlocked?
Full device compatibility list · Check carrier unlock status
Providers
Provider breakdown for Grenada
Nomad (Recommended)
Nomad is the recommended provider for Grenada with a 4.1/5 rating. Best Budget pick. Plans available: 1GB, 3GB, 5GB, 10GB, 20GB plus unlimited daily options. Installation via QR code delivered by email.
Install: 4.2/5 · QR Flow: 4/5
Docs: 3.9/5 · Reliability: 4.2/5
Alternative providers
| Provider | Per GB | Rating | Best For |
|---|---|---|---|
| Nomad#1 Pick | from $3.00/GB | 4.1/5 | Best Budget |
| Airalo | from $4.50/GB | 4.5/5 | Best Overall |
| Saily | from $3.99/GB | 4.4/5 | Best Privacy |
| HelloRoam | from around $3.50 per gigabyte | 4.4/5 | Coverage + Value |
| Holafly | from $2.99/day | 4.3/5 | Best Unlimited |
Which provider to choose
- Budget travel: Nomad offers the lowest per-GB rate
- Broadest coverage: Airalo covers 200+ countries on one account
- Unlimited data: Holafly removes the data counter entirely
- Privacy: Saily bundles NordVPN under the same account
Installation
Installation steps for Grenada eSIM
iOS installation (iPhone)
- Open Settings > Cellular > Add eSIM
- Select "Use QR Code"
- Scan the QR code from your Nomad confirmation email
- Label the plan (e.g., "Grenada Travel")
- Set as cellular data line (not your default for calls)
- Do NOT enable data roaming yet
- Confirm the plan appears under Settings > Cellular
iOS 18: the "Add eSIM" option appears under Settings > Cellular > Add Cellular Plan. iOS 17 and earlier: Settings > Cellular > Add eSIM.
Android installation (Google Pixel)
- Open Settings > Network & Internet > Add eSIM
- Select "Download a SIM instead" then scan
- Scan the QR code from your Nomad confirmation email
- Name the profile (e.g., "Grenada Data")
- Set as mobile data SIM
- Do NOT enable data roaming yet
- Verify the plan in SIM manager
Manual installation (if QR fails)
If the QR code does not scan, use manual entry:
- Go to Settings > Cellular > Add eSIM
- Select "Enter Details Manually"
- Enter the SM-DP+ address from your provider email
- Enter the activation code
- Complete the setup as with the QR method
Use manual entry when: camera cannot read the QR code, the email was forwarded without the image, or you are installing on a second device.
Configuration
Network configuration for Grenada
Automatic APN configuration
Most eSIM profiles auto-configure APN settings for FLOW's network. After installation, verify the APN is set correctly:
- iPhone: Settings > Cellular > Cellular Data Options > Cellular Data Network
- Android: Settings > Network & Internet > SIMs > (travel eSIM) > Access Point Names
A correctly configured APN shows the carrier name and data type. If the APN field is blank, your phone will attempt to auto-fill on first connection.
Manual APN entry
If auto-configuration fails (rare, typically older Android devices), enter APN settings manually. Check your provider's confirmation email for the exact values. Common fields:
| Field | Value |
|---|---|
| APN Name | From provider email |
| APN | Provider-specific value |
| Authentication | None (most providers) |
| APN Protocol | IPv4/IPv6 |
Provider-specific APN values override FLOW's carrier defaults. Always use the values from your provider, not generic carrier APNs.
Verification
Testing your connection in Grenada
Signal and network verification
Check your status bar: the carrier name should show FLOWor a roaming indicator. Signal bars confirm connection strength. Go to Settings > Cellular to verify data usage is counting on the travel eSIM line.
- "FLOW" or roaming icon: Connected and working
- "Searching...": Still connecting, wait 2-3 minutes
- "No Service": Data roaming is off or wrong SIM line selected
Speed test
Run fast.com or Speedtest.net to verify your connection speed. Expected speeds: 4G LTE (LTE typically 20-80 Mbps, 5G 100-500 Mbps where available). Speeds vary by location: airports and city centers are fastest, rural areas slower.
Verifying data roaming is active
Go to Settings > Cellular > (travel eSIM) > Data Roaming: ON. Test by opening any website in your browser. If it loads, roaming is active. If not, toggle data roaming off and back on, then restart your phone.
Dual-SIM verification
Confirm your home SIM still receives calls and texts. Confirm the travel eSIM handles all data traffic. Test: send yourself a text message to your home number. Then load a webpage. Both should work simultaneously. If data routes through the home SIM instead, switch your cellular data line to the travel eSIM.
Airport Guide
Arriving at Grenada's main airport with your eSIM
Before boarding
Purchase and install your Grenada eSIM 24-48 hours before departure. Plans start at $10.98 for 1GB. Scan the QR code on a stable WiFi connection at home. After installation, keep the profile disabled until you are on the ground in Grenada. FLOW begins the plan timer on first registration, so toggling it on during a layover burns a day you paid for.
During the flight
While airborne, review your cellular settings. The Grenada eSIM should appear as a separate line under Settings. Assign it as data-only. Leave your home number active for incoming texts — two-factor authentication codes from your bank still arrive over SMS.
After landing
Turn off airplane mode as the plane reaches the gate. Your phone searches for FLOW's 4G network and registers within 60-90 seconds. The carrier name appears in your status bar. Open your browser and load a page to confirm data is flowing. SIM counter availability at Grenada's main airport varies by terminal and time of day. Your eSIM eliminates that variable entirely.
Leaving the airport
With data active, pull up your hotel address in Maps before you reach the taxi stand. Compare ride-share prices while walking through arrivals. Other passengers are still at the SIM counter while you are in a car. Grenada's emergency number is 911 — it works without data, but having your eSIM active means you can also share GPS coordinates with emergency services.
Device Setup
Device-specific instructions for Grenada
iPhone (iOS 17+)
- Open Settings > Cellular > Add eSIM > Use QR Code.
- Point the camera at the QR code from your provider's email. The profile downloads in 5-15 seconds on stable WiFi.
- Tap "Add Cellular Plan" when prompted. Label the plan "Grenada Data" to distinguish it from your home line.
- Go to Settings > Cellular > Cellular Data and select the Grenada eSIM as your active data line.
- Turn on Data Roaming for the Grenada line only: Settings > Cellular > [Grenada Data] > Data Roaming > On.
- After landing at Grenada's main airport, toggle the eSIM on. FLOW registers your profile in 60-90 seconds. APN settings auto-configure for most Grenada eSIM plans on FLOW's network.
- Verify: open Safari and load any webpage. If the page renders, your Grenada data is active at 4G LTE speeds.
Carrier confirmation: Your status bar should display "FLOW" or "Digicel" with 4G signal within 60-90 seconds. On iPhone, check Settings > Cellular — the Grenada line shows "FLOW" under Network. The "4G" indicator confirms your connection type.
Note: If the carrier field shows "No Service" after 2 minutes, go to Settings > Cellular > Network Selection, turn off Automatic, wait 10 seconds, then turn it back on. If FLOW does not appear in the list, restart your iPhone (hold Side + Volume Down for 3 seconds, slide to power off, wait 30 seconds, power on).
Samsung Galaxy (One UI 6+)
- Open Settings > Connections > SIM Manager > Add eSIM.
- Select "Scan QR Code" and frame the QR code from your provider's email. The download completes in 5-15 seconds.
- Tap "Add" when the carrier profile loads. Label it "Grenada Data" under SIM Manager for clarity.
- Set the Grenada eSIM as your mobile data SIM: Settings > Connections > SIM Manager > Mobile Data > select Grenada eSIM.
- Enable Data Roaming: Settings > Connections > Mobile Networks > Data Roaming > On (for the travel SIM only).
- After landing at Grenada's main airport, enable the eSIM. FLOW's 4G network registers within 60-90 seconds. APN settings load automatically for most Grenada eSIM plans on FLOW's network.
- Verify: open Chrome and load any page. Data flowing confirms your Grenada eSIM is active.
Carrier confirmation: Your status bar should display "FLOW" or "Digicel" with 4G signal within 60-90 seconds. On Samsung, check Settings > Connections > SIM Manager — the travel SIM shows "FLOW" as the connected network. The connection type shows as "4G".
Note: If "No Service" persists after 2 minutes, go to Settings > Connections > Mobile Networks > Network Operators, switch from Automatic to Manual, wait for the scan to complete, then select FLOW. If the carrier does not appear, restart the device: hold Power + Volume Down until the restart menu appears.
Google Pixel (Android 14+)
- Open Settings > Network & Internet > SIMs > Add SIM > Download SIM.
- Scan the QR code from your eSIM provider's email. The profile downloads in under 15 seconds.
- Confirm the download and label the SIM "Grenada Data" for identification.
- Set as mobile data SIM: Settings > Network & Internet > SIMs > Grenada Data > Use for mobile data.
- Enable roaming: Settings > Network & Internet > SIMs > Grenada Data > Roaming > On.
- After landing at Grenada's main airport, enable the profile. FLOW connects within 60-90 seconds. APN settings self-configure on Pixel devices for most Grenada plans.
- Open Chrome and load any page to verify data connectivity on FLOW's 4G network.
Carrier confirmation: Your status bar should display "FLOW" or "Digicel" with 4G signal within 60-90 seconds. On Pixel, check Settings > Network & Internet > SIMs — the travel SIM displays "FLOW" as the active network.
Note: If the signal does not register within 2 minutes, go to Settings > Network & Internet > SIMs > Grenada Data > Advanced > Choose network, switch to Manual, let the scan run, and select FLOW. If it fails, reset network settings under Settings > System > Reset options > Reset Mobile, WiFi & Bluetooth.
Carrier Config
Carrier troubleshooting for Grenada
FLOW
Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "FLOW" from the list. The phone locks onto FLOW's 4G band and data resumes within 30 seconds.
Expected speed: Fastest 4G speeds in Grenada's urban areas
Common issue: FLOW may show a signal bar but no data if the APN was not auto-configured. This happens on roughly 10-15% of Grenada eSIM activations. Contact your eSIM provider for the correct APN string.
Resolution: Reset network settings: Settings > General > Transfer or Reset > Reset Network Settings (iPhone) or Settings > General Management > Reset > Reset Network Settings (Samsung). This clears saved WiFi passwords but resolves most FLOW registration failures. Re-enable the Grenada eSIM after the reset completes.
Digicel
APN: "web.digicelgy.com" — enter under Settings > Cellular > Cellular Data Network (iPhone) or Settings > Connections > Mobile Networks > Access Point Names (Samsung). Leave username, password, and proxy fields blank. Save and restart data.
Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "Digicel" from the list. The phone locks onto Digicel's 4G band and data resumes within 30 seconds.
Expected speed: Reliable 4G coverage across Grenada's main cities
Common issue: If Digicel connects but web pages time out, the phone may have defaulted to your home SIM for data. Go to Settings > Cellular > Cellular Data and confirm the Grenada eSIM is selected. The home SIM handles calls only.
Resolution: Contact your eSIM provider's support with the SM-DP+ activation address from your confirmation email. Some Digicel profile issues require a new QR code. Airalo responds via in-app chat in under 5 minutes; Holafly offers WhatsApp support at +34 644 44 37 97.
Dual SIM
Dual SIM setup for Grenada: keep your number, use local data
Data line setup
Set the Grenada eSIM as your cellular data line: Settings > Cellular > Cellular Data > select the travel eSIM. All web traffic, maps, and app data route through FLOW's 4G network at $10.98 for 1GB. Your home carrier never touches data traffic, so no roaming charges accumulate.
Calls and SMS
Your home SIM handles calls and texts on your existing number. No one calling you sees a difference. SMS-based verification codes for banking apps and login services arrive on the home SIM as usual. Data-based messaging apps (WhatsApp, iMessage, Telegram) use the Grenada eSIM's data connection through FLOW.
Emergency dialing
Grenada's emergency number is 911. This call connects through any network, regardless of which SIM is active or whether you have data. Your eSIM gives you the additional ability to use GPS mapping to find the nearest hospital and to share coordinates with emergency responders via text or messaging apps.
Battery impact
Two active SIMs cost roughly 10-15% more battery. The phone runs separate baseband connections for each line. On days with heavy use, turn off the home SIM under Settings and leave only the Grenada eSIM active. Your home number goes to voicemail until you re-enable it. Grenada outlets are Type G — bring an adapter and a portable charger.
Hotspot
Tethering and hotspot with your Grenada eSIM
Most eSIM plans for Grenada support personal hotspot out of the box. Enable it under Settings > Personal Hotspot (iPhone) or Settings > Connections > Mobile Hotspot (Samsung). Your laptop, tablet, or travel companion's phone connects through your Grenada eSIM on FLOW's 4G network. Hotspot throughput typically reaches 4G speeds through hotspot, slightly below direct device connection. Video calls over hotspot use 300-500 MB per hour. A 1GB plan supports 6-10 hours of video calling before running low.
Provider restrictions
Not every plan includes hotspot. Holafly's unlimited eSIM plans for Grenada restrict tethering to prevent network abuse. Airalo and Nomad include hotspot on their fixed-data plans. If the Personal Hotspot toggle is missing from Settings, the plan blocks it at the carrier level — no workaround exists without switching to a hotspot-enabled plan.
Data impact
Hotspot data consumption is higher than direct phone use: laptops pull desktop-resolution assets. Budget 150-200 MB/hour for browsing, 300-500 MB/hour for video calls, 1.5-3 GB/hour for streaming. Turn off cloud sync, OS updates, and auto-downloads on connected devices to protect your Grenada data allowance.
WiFi Backup
Grenada WiFi availability for eSIM setup
Grenada offers moderate WiFi in urban areas; spotty in rural regions. Install your eSIM before leaving home. The download is tiny (under 1 MB) but requires an uninterrupted HTTPS connection to the carrier's provisioning server. Public WiFi with captive portals — including Grenada's main airport's network — can block this connection. Home WiFi eliminates the risk.
Activating without WiFi
No WiFi for QR scan? Use manual activation. Check your provider's email for the SM-DP+ address (a URL starting with "smdp+") and the matching activation code. On iPhone: Settings > Cellular > Add eSIM > Enter Details Manually. On Samsung: SIM Manager > Add eSIM > Enter Activation Code. You can use your home carrier's mobile data for this — it transfers less than 1 MB.
Multi-Country
Multi-stop itinerary: Grenada eSIM alongside other profiles
For a multi-country itinerary, install one eSIM per country before departure. Grenada's eSIM connects to FLOW's 4G network directly, avoiding the speed penalty that multi-country roaming eSIMs carry. At the Grenada border, disable your previous eSIM and enable the Grenada profile. The process: Settings > Cellular, toggle off the old line, toggle on the new one. Done in 30 seconds.
Switching eSIM profiles between countries
Border crossing procedure: disable the previous eSIM, enable Grenada. iPhone: Settings > Cellular > tap each line to toggle. Samsung: Settings > Connections > SIM Manager > toggle lines. Confirm Grenada is the active data line. Enable data roaming. FLOW's 4G signal registers in 60-90 seconds. The entire switch takes 30 seconds.
Fixes
Common errors during Grenada eSIM setup
"eSIM Not Supported" error
Cause: Your phone is carrier-locked or the model does not support eSIM.
Fix: Contact your home carrier to unlock (24-72 hours). Verify your model supports eSIM at our compatibility list.
"Unable to Activate eSIM" error
Cause: eSIM profile slot is full, or the QR code was already redeemed.
Fix:Delete unused eSIM profiles in Settings > Cellular. iPhones hold 8 profiles (2 active). If the QR shows as used, contact your provider for a replacement code.
Connected but no data
Cause: Data roaming is off on the travel eSIM, or data is routing through the home SIM.
Fix:Settings > Cellular > select travel eSIM > Data Roaming ON. Also verify: Settings > Cellular > Cellular Data > select the travel eSIM as your data line. Restart your phone after making changes.
Provider-specific installation issues
- Airalo: QR code in email and in-app. Re-download available in the app under "My eSIMs"
- Nomad: QR delivered by email only. Check spam folder. No app required for installation
- Holafly: QR code in app and email. Unlimited plans activate on first connection
- Saily: QR in app. VPN configuration separate from eSIM setup
Quick Answers
Common setup questions for Grenada
FAQ
Frequently asked: Grenada eSIM setup
How do I install an eSIM for Grenada on iPhone?
Open Settings > Cellular > Add eSIM > Use QR Code. Scan the code from your provider email. Label the plan "Grenada Travel" and set it as your cellular data line. The process takes about 5 minutes over WiFi.
How do I install an eSIM for Grenada on Android?
Open Settings > Network & Internet > Add eSIM. Select "Download a SIM instead" then scan. Scan the QR code from your provider email. Name the profile "Grenada Data" and set it as your mobile data SIM. Steps vary slightly between Google Pixel and other Android versions.
What APN settings do I need for Grenada?
Most eSIMs auto-configure APN for FLOW's network. If auto-config fails, check your provider's confirmation email for manual APN values. Go to Settings > Cellular > Cellular Data Options > Cellular Data Network to verify or enter settings manually.
Can I install the eSIM before my trip to Grenada?
Yes. Install at home over WiFi any time before departure. Do not enable data roaming until you land in Grenada. Plans count from the first network connection, not from installation. Installing early is recommended.
How many eSIM profiles can my phone hold?
iPhone holds up to 8 eSIM profiles with 2 active simultaneously. Android varies by manufacturer: Samsung supports 5-8, Google Pixel supports 8+. Delete unused profiles in Settings > Cellular to make room for new ones.
What if the QR code does not work for Grenada?
Use manual activation: Settings > Cellular > Add eSIM > Enter Details Manually. Find the SM-DP+ address and activation code in your provider email. This method works when the camera cannot read the QR code or when using a forwarded email.
How do I know my eSIM is connected to FLOW?
Check the status bar for "FLOW" or a roaming indicator. Run a speed test at fast.com. Expected speeds: 4G LTE speeds. If you see "No Service," enable data roaming on the travel eSIM line.
How to scan eSIM QR code for Grenada?
See the step-by-step instructions above for Grenada. Install the eSIM via QR code over WiFi, configure FLOW as your data line, and enable data roaming after landing. Plans from $10.98 for 1GB.
How to configure dual SIM for Grenada?
See the step-by-step instructions above for Grenada. Install the eSIM via QR code over WiFi, configure FLOW as your data line, and enable data roaming after landing. Plans from $10.98 for 1GB.
How to enable data roaming on eSIM for Grenada?
See the step-by-step instructions above for Grenada. Install the eSIM via QR code over WiFi, configure FLOW as your data line, and enable data roaming after landing. Plans from $10.98 for 1GB.
How to switch to eSIM data line for Grenada?
See the step-by-step instructions above for Grenada. Install the eSIM via QR code over WiFi, configure FLOW as your data line, and enable data roaming after landing. Plans from $10.98 for 1GB.
How to set up eSIM on Samsung for Grenada?
See the step-by-step instructions above for Grenada. Install the eSIM via QR code over WiFi, configure FLOW as your data line, and enable data roaming after landing. Plans from $10.98 for 1GB.
Related guides
Provider pricing and network analysis
Travel guide for GrenadaPre-departure, activation, data tips
General activation guideStep-by-step eSIM activation
Dual-SIM setupUse both SIMs simultaneously
Remove old eSIM profilesFree up eSIM slots on your phone
More Americas destinationseSIM plans across the region
Nearby destinations
Start your Grenada setup. 5 minutes, no counter.
Nomad: from $7.47/GB on FLOW. Install at home, activate on arrival.