Setup Guide

Set Up Your Bermuda eSIM: Quick Install Guide for 2026

July 20269 min readBy Daniel Mercer, Lead eSIM Analyst

1 network tested
5 providers compared
Updated June 2026

Daniel Mercer

Lead eSIM Analyst

43 countries tested280 plans reviewed14 airports tested8 years in telecom

Previously at Analysys Mason covering APAC mobile markets (2016-2021)

How we test

Published July 2026 · Updated June 2026

Compatibility

Supported devices for Bermuda plans

iPhone

Supported models: iPhone XR, XS, 11 through 16 Pro Max, and SE (3rd generation). Requires iOS 16 or later. iPhones hold up to 8 eSIM profiles with 2 active simultaneously. Check carrier lock: Settings > General > About > Carrier Lock.

Android

Supported: Samsung Galaxy S21 and later (S22-S25, Z Flip/Fold series), Google Pixel 3+, Xiaomi 12T Pro and later. Requires Android 10 or later. eSIM profile limits vary: Samsung holds 5-8 profiles, Pixel supports 8+.

Is your phone unlocked?

[object Object]

Full device compatibility list · Check carrier unlock status

Providers

Bermuda eSIM providers compared

Nomad (Recommended)

Nomad is the recommended provider for Bermuda with a 4.1/5 rating. Best Budget pick. Plans available: 1GB, 3GB, 5GB, 10GB, 20GB plus unlimited daily options. Installation via QR code delivered by email.

Overall

Install: 4.2/5 · QR Flow: 4/5

Docs: 3.9/5 · Reliability: 4.2/5

Nomad full review

Alternative providers

eSIM providers for Bermuda
Provider	Per GB	Rating	Best For
Nomad#1 Pick	from $3.00/GB	4.1/5	Best Budget
Airalo	from $4.50/GB	4.5/5	Best Overall
Saily	from $3.99/GB	4.4/5	Best Privacy
HelloRoam	from around $3.50 per gigabyte	4.4/5	Coverage + Value
Holafly	from $2.99/day	4.3/5	Best Unlimited

Which provider to choose

Budget travel: Nomad offers the lowest per-GB rate
Broadest coverage: Airalo covers 200+ countries on one account
Unlimited data: Holafly removes the data counter entirely
Privacy: Saily bundles NordVPN under the same account

Installation

Step-by-step eSIM installation

iOS installation (iPhone)

Open Settings > Cellular > Add eSIM
Select "Use QR Code"
Scan the QR code from your Nomad confirmation email
Label the plan (e.g., "Bermuda Travel")
Set as cellular data line (not your default for calls)
Do NOT enable data roaming yet
Confirm the plan appears under Settings > Cellular

iOS 18: the "Add eSIM" option appears under Settings > Cellular > Add Cellular Plan. iOS 17 and earlier: Settings > Cellular > Add eSIM.

Android installation (Samsung One UI)

Open Settings > Connections > SIM Manager > Add eSIM
Select "Download SIM" then "Scan QR code"
Scan the QR code from your Nomad confirmation email
Name the profile (e.g., "Bermuda Data")
Set as mobile data SIM
Do NOT enable data roaming yet
Verify the plan in SIM manager

Manual installation (if QR fails)

If the QR code does not scan, use manual entry:

Go to Settings > Cellular > Add eSIM
Select "Enter Details Manually"
Enter the SM-DP+ address from your provider email
Enter the activation code
Complete the setup as with the QR method

Use manual entry when: camera cannot read the QR code, the email was forwarded without the image, or you are installing on a second device.

Configuration

APN and band settings for Bermuda

Automatic APN configuration

Most eSIM profiles auto-configure APN settings for Digicel BM's network. After installation, verify the APN is set correctly:

iPhone: Settings > Cellular > Cellular Data Options > Cellular Data Network
Android: Settings > Network & Internet > SIMs > (travel eSIM) > Access Point Names

A correctly configured APN shows the carrier name and data type. If the APN field is blank, your phone will attempt to auto-fill on first connection.

Manual APN entry

If auto-configuration fails (rare, typically older Android devices), enter APN settings manually. Check your provider's confirmation email for the exact values. Common fields:

APN configuration fields
Field	Value
APN Name	From provider email
APN	Provider-specific value
Authentication	None (most providers)
APN Protocol	IPv4/IPv6

Provider-specific APN values override Digicel BM's carrier defaults. Always use the values from your provider, not generic carrier APNs.

Verification

Confirming your Bermuda eSIM setup

Signal and network verification

Check your status bar: the carrier name should show Digicel BMor a roaming indicator. Signal bars confirm connection strength. Go to Settings > Cellular to verify data usage is counting on the travel eSIM line.

"Digicel BM" or roaming icon: Connected and working
"Searching...": Still connecting, wait 2-3 minutes
"No Service": Data roaming is off or wrong SIM line selected

Speed test

Run fast.com or Speedtest.net to verify your connection speed. Expected speeds: 4G LTE (LTE typically 20-80 Mbps, 5G 100-500 Mbps where available). Speeds vary by location: airports and city centers are fastest, rural areas slower.

Verifying data roaming is active

Go to Settings > Cellular > (travel eSIM) > Data Roaming: ON. Test by opening any website in your browser. If it loads, roaming is active. If not, toggle data roaming off and back on, then restart your phone.

Dual-SIM verification

Confirm your home SIM still receives calls and texts. Confirm the travel eSIM handles all data traffic. Test: send yourself a text message to your home number. Then load a webpage. Both should work simultaneously. If data routes through the home SIM instead, switch your cellular data line to the travel eSIM.

Airport Guide

Arriving at Bermuda's main airport with your eSIM

Before boarding

Purchase and install your Bermuda eSIM 24-48 hours before departure. Plans start at $9.65 for 1GB. Scan the QR code on a stable WiFi connection at home. After installation, keep the profile disabled until you are on the ground in Bermuda. Digicel BM begins the plan timer on first registration, so toggling it on during a layover burns a day you paid for.

During the flight

While airborne, review your cellular settings. The Bermuda eSIM should appear as a separate line under Settings. Assign it as data-only. Leave your home number active for incoming texts — two-factor authentication codes from your bank still arrive over SMS.

After landing

Turn off airplane mode as the plane reaches the gate. Your phone searches for Digicel BM's 4G network and registers within 60-90 seconds. The carrier name appears in your status bar. Open your browser and load a page to confirm data is flowing. SIM counter availability at Bermuda's main airport varies by terminal and time of day. Your eSIM eliminates that variable entirely.

Leaving the airport

With data active, pull up your hotel address in Maps before you reach the taxi stand. Compare ride-share prices while walking through arrivals. Other passengers are still at the SIM counter while you are in a car. Bermuda's emergency number is 911 — it works without data, but having your eSIM active means you can also share GPS coordinates with emergency services.

Device Setup

Device-specific instructions for Bermuda

iPhone (iOS 17+)

Open Settings > Cellular > Add eSIM > Use QR Code.
Point the camera at the QR code from your provider's email. The profile downloads in 5-15 seconds on stable WiFi.
Tap "Add Cellular Plan" when prompted. Label the plan "Bermuda Data" to distinguish it from your home line.
Go to Settings > Cellular > Cellular Data and select the Bermuda eSIM as your active data line.
Turn on Data Roaming for the Bermuda line only: Settings > Cellular > [Bermuda Data] > Data Roaming > On.
After landing at Bermuda's main airport, toggle the eSIM on. Digicel BM registers your profile in 60-90 seconds. If data does not connect after 3 minutes, add the APN manually: go to Cellular Data Network and enter APN: "web.digicelgy.com". Leave username and password blank.
Verify: open Safari and load any webpage. If the page renders, your Bermuda data is active at 4G LTE speeds.

Carrier confirmation: Your status bar should display "Digicel BM" or "One Communications" with 4G signal within 60-90 seconds. On iPhone, check Settings > Cellular — the Bermuda line shows "Digicel BM" under Network. The "4G" indicator confirms your connection type.

Note: If the carrier field shows "No Service" after 2 minutes, go to Settings > Cellular > Network Selection, turn off Automatic, wait 10 seconds, then turn it back on. If Digicel BM does not appear in the list, restart your iPhone (hold Side + Volume Down for 3 seconds, slide to power off, wait 30 seconds, power on).

Samsung Galaxy (One UI 6+)

Open Settings > Connections > SIM Manager > Add eSIM.
Select "Scan QR Code" and frame the QR code from your provider's email. The download completes in 5-15 seconds.
Tap "Add" when the carrier profile loads. Label it "Bermuda Data" under SIM Manager for clarity.
Set the Bermuda eSIM as your mobile data SIM: Settings > Connections > SIM Manager > Mobile Data > select Bermuda eSIM.
Enable Data Roaming: Settings > Connections > Mobile Networks > Data Roaming > On (for the travel SIM only).
After landing at Bermuda's main airport, enable the eSIM. Digicel BM's 4G network registers within 60-90 seconds. If data does not connect within 3 minutes, enter the APN manually: Settings > Connections > Mobile Networks > Access Point Names > Add. Name: Digicel BM, APN: "web.digicelgy.com". Save and select it as active.
Verify: open Chrome and load any page. Data flowing confirms your Bermuda eSIM is active.

Carrier confirmation: Your status bar should display "Digicel BM" or "One Communications" with 4G signal within 60-90 seconds. On Samsung, check Settings > Connections > SIM Manager — the travel SIM shows "Digicel BM" as the connected network. The connection type shows as "4G".

Note: If "No Service" persists after 2 minutes, go to Settings > Connections > Mobile Networks > Network Operators, switch from Automatic to Manual, wait for the scan to complete, then select Digicel BM. If the carrier does not appear, restart the device: hold Power + Volume Down until the restart menu appears.

Google Pixel (Android 14+)

Open Settings > Network & Internet > SIMs > Add SIM > Download SIM.
Scan the QR code from your eSIM provider's email. The profile downloads in under 15 seconds.
Confirm the download and label the SIM "Bermuda Data" for identification.
Set as mobile data SIM: Settings > Network & Internet > SIMs > Bermuda Data > Use for mobile data.
Enable roaming: Settings > Network & Internet > SIMs > Bermuda Data > Roaming > On.
After landing at Bermuda's main airport, enable the profile. Digicel BM connects within 60-90 seconds. If data fails to connect, add the APN: Settings > Network & Internet > SIMs > [Bermuda eSIM] > Access Point Names > New APN. Name: Digicel BM, APN: "web.digicelgy.com". Save and set as default.
Open Chrome and load any page to verify data connectivity on Digicel BM's 4G network.

Carrier confirmation: Your status bar should display "Digicel BM" or "One Communications" with 4G signal within 60-90 seconds. On Pixel, check Settings > Network & Internet > SIMs — the travel SIM displays "Digicel BM" as the active network.

Note: If the signal does not register within 2 minutes, go to Settings > Network & Internet > SIMs > Bermuda Data > Advanced > Choose network, switch to Manual, let the scan run, and select Digicel BM. If it fails, reset network settings under Settings > System > Reset options > Reset Mobile, WiFi & Bluetooth.

Carrier Config

Carrier troubleshooting for Bermuda

Digicel BM

APN: "web.digicelgy.com" — enter under Settings > Cellular > Cellular Data Network (iPhone) or Settings > Connections > Mobile Networks > Access Point Names (Samsung). Leave username, password, and proxy fields blank. Save and restart data.

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "Digicel BM" from the list. The phone locks onto Digicel BM's 4G band and data resumes within 30 seconds.

Expected speed: Fastest 4G speeds in Bermuda's urban areas

Common issue: Digicel BM's network occasionally delays eSIM profile registration during peak hours at major airports. If your phone shows "Searching..." for more than 2 minutes, turn off Automatic network selection, wait 10 seconds, then select Digicel BM manually from the operator list.

Resolution: Restart your phone after adjusting network settings. Digicel BM typically completes registration within 60-90 seconds of a fresh boot. If the issue persists, remove and re-add the eSIM profile using the manual activation code from your provider's confirmation email.

One Communications

Network selection: Open Settings > Cellular > Network Selection (iPhone) or Settings > Connections > Mobile Networks > Network Operators (Samsung). Turn off Automatic. Wait 10-30 seconds for the carrier list to populate. Select "One Communications" from the list. The phone locks onto One Communications's 4G band and data resumes within 30 seconds.

Expected speed: Reliable 4G coverage across Bermuda's main cities

Common issue: Some eSIM plans routed through One Communications require data roaming to be enabled on the travel SIM line specifically. Leaving it off is the most common reason travelers report zero signal after landing in Bermuda. Check under Settings > Cellular > [Travel eSIM] > Data Roaming.

Resolution: Toggle airplane mode on for 15 seconds, then off. This forces a fresh network scan without a full restart. One Communications should appear in your carrier field within 60 seconds. If it does not, use manual network selection to find and choose One Communications directly.

Dual SIM

Dual SIM setup for Bermuda: keep your number, use local data

Data line setup

Set the Bermuda eSIM as your cellular data line: Settings > Cellular > Cellular Data > select the travel eSIM. All web traffic, maps, and app data route through Digicel BM's 4G network at $9.65 for 1GB. Your home carrier never touches data traffic, so no roaming charges accumulate.

Calls and SMS

Your home SIM handles calls and texts on your existing number. No one calling you sees a difference. SMS-based verification codes for banking apps and login services arrive on the home SIM as usual. Data-based messaging apps (WhatsApp, iMessage, Telegram) use the Bermuda eSIM's data connection through Digicel BM.

Emergency dialing

Bermuda's emergency number is 911. This call connects through any network, regardless of which SIM is active or whether you have data. Your eSIM gives you the additional ability to use GPS mapping to find the nearest hospital and to share coordinates with emergency responders via text or messaging apps.

Battery impact

Two active SIMs cost roughly 10-15% more battery. The phone runs separate baseband connections for each line. On days with heavy use, turn off the home SIM under Settings and leave only the Bermuda eSIM active. Your home number goes to voicemail until you re-enable it. Bermuda outlets are Type A/B — bring an adapter and a portable charger.

Hotspot

Tethering and hotspot with your Bermuda eSIM

Most eSIM plans for Bermuda support personal hotspot out of the box. Enable it under Settings > Personal Hotspot (iPhone) or Settings > Connections > Mobile Hotspot (Samsung). Your laptop, tablet, or travel companion's phone connects through your Bermuda eSIM on Digicel BM's 4G network. Hotspot throughput typically reaches 4G speeds through hotspot, slightly below direct device connection. Video calls over hotspot use 300-500 MB per hour. A 1GB plan supports 6-10 hours of video calling before running low.

Provider restrictions

Not every plan includes hotspot. Holafly's unlimited eSIM plans for Bermuda restrict tethering to prevent network abuse. Airalo and Nomad include hotspot on their fixed-data plans. If the Personal Hotspot toggle is missing from Settings, the plan blocks it at the carrier level — no workaround exists without switching to a hotspot-enabled plan.

Data impact

Hotspot data consumption is higher than direct phone use: laptops pull desktop-resolution assets. Budget 150-200 MB/hour for browsing, 300-500 MB/hour for video calls, 1.5-3 GB/hour for streaming. Turn off cloud sync, OS updates, and auto-downloads on connected devices to protect your Bermuda data allowance.

WiFi Backup

WiFi and eSIM activation in Bermuda

Bermuda has moderate WiFi in urban areas; spotty in rural regions. The best approach: install your eSIM at home over your own WiFi before departure. The QR code scan transfers about 500 KB of profile data — it needs a clean connection, not speed. Airport WiFi at Bermuda's main airport uses captive portals that can interrupt the eSIM download. Install at home, travel with confidence.

Activating without WiFi

If you cannot scan the QR code, use manual entry. Your eSIM provider's confirmation email contains an SM-DP+ activation address and activation code. On iPhone: Settings > Cellular > Add eSIM > Enter Details Manually. On Samsung: Settings > Connections > SIM Manager > Add eSIM > Enter Activation Code. Enter the SM-DP+ address and code exactly as shown. This method uses your existing data connection (home carrier or WiFi) and does not require a camera.

Multi-Country

Bermuda eSIM on a multi-country trip

If Bermuda is one stop on a multi-country itinerary, install all country eSIMs before departure. Most phones store 8 or more eSIM profiles. Label each one clearly: "Bermuda Data," "France Data," etc. At each border, disable the previous country's eSIM and enable the next one. The switch takes 30 seconds under Settings > Cellular. A single-country Bermuda plan on Digicel BM's 4G network delivers better local coverage than a multi-country regional eSIM — starting at $9.65 for 1GB.

Switching eSIM profiles between countries

At the Bermuda border, open Settings > Cellular (iPhone) or SIM Manager (Samsung). Disable your previous eSIM. Enable the Bermuda profile and set it as the active data line. Turn on data roaming for the Bermuda line. Digicel BM's 4G network connects within 60-90 seconds. Do not delete the previous eSIM — you may need it on the return leg.

Fixes

When your Bermuda eSIM does not work

"eSIM Not Supported" error

Cause: Your phone is carrier-locked or the model does not support eSIM.

Fix: Contact your home carrier to unlock (24-72 hours). Verify your model supports eSIM at our compatibility list.

"Unable to Activate eSIM" error

Cause: eSIM profile slot is full, or the QR code was already redeemed.

Fix:Delete unused eSIM profiles in Settings > Cellular. iPhones hold 8 profiles (2 active). If the QR shows as used, contact your provider for a replacement code.

Connected but no data

Cause: Data roaming is off on the travel eSIM, or data is routing through the home SIM.

Fix:Settings > Cellular > select travel eSIM > Data Roaming ON. Also verify: Settings > Cellular > Cellular Data > select the travel eSIM as your data line. Restart your phone after making changes.

Provider-specific installation issues

Airalo: QR code in email and in-app. Re-download available in the app under "My eSIMs"
Nomad: QR delivered by email only. Check spam folder. No app required for installation
Holafly: QR code in app and email. Unlimited plans activate on first connection
Saily: QR in app. VPN configuration separate from eSIM setup

Full troubleshooting guide · Transfer eSIM to new phone

Quick Answers

Common setup questions for Bermuda

FAQ

Your Bermuda setup questions answered

How do I install an eSIM for Bermuda on iPhone?

Open Settings > Cellular > Add eSIM > Use QR Code. Scan the code from your provider email. Label the plan "Bermuda Travel" and set it as your cellular data line. The process takes about 5 minutes over WiFi.

How do I install an eSIM for Bermuda on Android?

Open Settings > Connections > SIM Manager > Add eSIM. Select "Download SIM" then "Scan QR code". Scan the QR code from your provider email. Name the profile "Bermuda Data" and set it as your mobile data SIM. Steps vary slightly between Samsung One UI and other Android versions.

What APN settings do I need for Bermuda?

Most eSIMs auto-configure APN for Digicel BM's network. If auto-config fails, check your provider's confirmation email for manual APN values. Go to Settings > Cellular > Cellular Data Options > Cellular Data Network to verify or enter settings manually.

Can I install the eSIM before my trip to Bermuda?

Yes. Install at home over WiFi any time before departure. Do not enable data roaming until you land in Bermuda. Plans count from the first network connection, not from installation. Installing early is recommended.

How many eSIM profiles can my phone hold?

iPhone holds up to 8 eSIM profiles with 2 active simultaneously. Android varies by manufacturer: Samsung supports 5-8, Google Pixel supports 8+. Delete unused profiles in Settings > Cellular to make room for new ones.

What if the QR code does not work for Bermuda?

Use manual activation: Settings > Cellular > Add eSIM > Enter Details Manually. Find the SM-DP+ address and activation code in your provider email. This method works when the camera cannot read the QR code or when using a forwarded email.

How do I know my eSIM is connected to Digicel BM?

Check the status bar for "Digicel BM" or a roaming indicator. Run a speed test at fast.com. Expected speeds: 4G LTE speeds. If you see "No Service," enable data roaming on the travel eSIM line.

How to scan eSIM QR code for Bermuda?